The inception of the Tiger Lite Gaming project stems from a dedicated community of ABS plastic case enthusiasts.
These users seek a lightweight alternative that offers a distinct acoustic profile and typing experience compared to traditional aluminum Keyboards.
With the Tiger Lite Gaming, we have meticulously refined key configurations to not only meet the demands of these users but also cater to gamers
by upgrading to a 8K polling rate PCB. This dual focus ensures that both groups can enjoy an exceptional experience.
Ready to Use Tiger Lite Gaming PBTfans Neon R2 Base with glitter kit
$130.00
SKU:
ZH20660
Tiger Lite Gaming
Tofix 8K PCB Version Include:
- ABS Plastic Top and Bottom case x1
- Polycarbonate or FR4 plate x1
- Tofix 8K RGB PCB x1
- USB Daughter Board x1
- 3.5mm Plate foam x1
- 0.1mm PET Switch pads x1
- Silicone socks set x1
- Cherry stabs kit x1 set
- USB-C cable x1
- Rubber feet x1 set
- Carrying case x1
- T6 screw driver x1
- PBTfans neon R2 Base with glitter kit (PT51-8)
Tofix 8K Firmware:
Case Injection Molding Optimization and Cracking Notice
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
Tofix 8K Layout
Tofix 8K PCB
USB-C interface
1.6mm thickness
Non-Flex cut
Per key RGB
8K Polling Rate
Support VIA
Function row F1-F12
Bottom row with 6.25U spacebar
Better Gaming Experience
Brand New PCB Design（Tofix 8X）
The responsiveness has been significantly improved with a 8K polling rate, greatly enhancing the experience for esports players. Additionally, the PCB design has been revamped to a non-flex cut, with its thickness increased from 1.2mm to 1.6mm,this modification ensures a more consistent typing feel. Moreover, Per-key RGB lighting provides a more immersive gaming experience
Various Plate Materials Available
Compared to V1, the options for the plate have become more diverse. It now comes standard with polycarbonate material, while also offering FR4 option. This variety caters to gamers with different typing preferences.
Custom new top case mold
The new top case mold eliminates the F13 key from the function row, resulting in a more harmonious and unified visual design. Geonworks, previously the Korean distributor for Tiger Lite V1, provided us with valuable feedback, noting that most gamers actually prefer the F12 key. Therefore, when developing V2, we decisively chose to create a custom top case mold to meet the demands of gamers.
Silicone Gasket Structure
7° Typing angle: Ergonomic Design
Dimensions
Tiger Lite Gaming
The inception of the Tiger Lite Gaming project stems from a dedicated community of ABS plastic case enthusiasts.
These users seek a lightweight alternative that offers a distinct acoustic profile and typing experience compared to traditional aluminum Keyboards.
With the Tiger Lite Gaming, we have meticulously refined key configurations to not only meet the demands of these users but also cater to gamers
by upgrading to a 8K polling rate PCB. This dual focus ensures that both groups can enjoy an exceptional experience.
Tofix 8K PCB Version Include:
- ABS Plastic Top and Bottom case x1
- Polycarbonate or FR4 plate x1
- Tofix 8K RGB PCB x1
- USB Daughter Board x1
- 3.5mm Plate foam x1
- 0.1mm PET Switch pads x1
- Silicone socks set x1
- Cherry stabs kit x1 set
- USB-C cable x1
- Rubber feet x1 set
- Carrying case x1
- T6 screw driver x1
- PBTfans neon R2 Base with glitter kit (PT51-8)
Tofix 8K Firmware:
Case Injection Molding Optimization and Cracking Notice
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
Tofix 8K Layout
Tofix 8K PCB
USB-C interface
1.6mm thickness
Non-Flex cut
Per key RGB
8K Polling Rate
Support VIA
Function row F1-F12
Bottom row with 6.25U spacebar
Plate
- Polycarbonate plate for Tofix 8K
- FR4 plate for Tofix 8K/Venom HE
Better Gaming Experience
Brand New PCB Design（Tofix 8X）
The responsiveness has been significantly improved with a 8K polling rate, greatly enhancing the experience for esports players. Additionally, the PCB design has been revamped to a non-flex cut, with its thickness increased from 1.2mm to 1.6mm,this modification ensures a more consistent typing feel. Moreover, Per-key RGB lighting provides a more immersive gaming experience
Various Plate Materials Available
Compared to V1, the options for the plate have become more diverse. It now comes standard with polycarbonate material, while also offering FR4 option. This variety caters to gamers with different typing preferences.
Custom new top case mold
The new top case mold eliminates the F13 key from the function row, resulting in a more harmonious and unified visual design. Geonworks, previously the Korean distributor for Tiger Lite V1, provided us with valuable feedback, noting that most gamers actually prefer the F12 key. Therefore, when developing V2, we decisively chose to create a custom top case mold to meet the demands of gamers.
